Cable Quad FC-T-2S-T Rk0,3
| Diameter of conductors (mm) | Number of conductors | Nominal Weight (kg/km) | Nominal OD (mm) |
|---|---|---|---|
| 0.9 | 1x2 | 19.1 | 712 |
| 0.9 | 3x2 | 21.1 | 819 |
| 0.9 | 5x2 | 23.6 | 971 |
| 0.9 | 7x2 | 24.0 | 1050 |
| 0.9 | 10x2 | 26.4 | 1247 |
| 0.9 | 14x2 | 29.8 | 1539 |
| 0.9 | 19x2 | 32.7 | 1801 |
| 0.9 | 25x2 | 35.8 | 2124 |
| 1.4 | 1x2 | 19.1 | 731 |
| 1.4 | 3x2 | 24.9 | 1083 |
| 1.4 | 5x2 | 28.7 | 1400 |
| 1.4 | 7x2 | 29.6 | 1589 |
| 1.4 | 10x2 | 33.1 | 1935 |
| 1.4 | 14x2 | 37.2 | 2409 |
| 1.4 | 19x2 | 41.5 | 2967 |
| 1.4 | 25x2 | 46.2 | 3627 |
| Diameter of conductors (mm) | Number of conductors | Maximum allowable radius | Operating temperature range | Installation temperature range |
|---|---|---|---|---|
| 0.9 | 1x2 | 15 x Ø cable | -25 °C a +75 °C | |
| 0.9 | 3x2 | 15 x Ø cable | -25 °C a +75 °C | |
| 0.9 | 5x2 | 15 x Ø cable | -25 °C a +75 °C | |
| 0.9 | 7x2 | 15 x Ø cable | -25 °C a +75 °C | |
| 0.9 | 10x2 | 15 x Ø cable | -25 °C a +75 °C | |
| 0.9 | 14x2 | 15 x Ø cable | -25 °C a +75 °C | |
| 0.9 | 19x2 | 15 x Ø cable | -25 °C a +75 °C | |
| 0.9 | 25x2 | 15 x Ø cable | -25 °C a +75 °C | |
| 1.4 | 1x2 | 15 x Ø cable | -25 °C a +75 °C | |
| 1.4 | 3x2 | 15 x Ø cable | -25 °C a +75 °C | |
| 1.4 | 5x2 | 15 x Ø cable | -25 °C a +75 °C | |
| 1.4 | 7x2 | 15 x Ø cable | -25 °C a +75 °C | |
| 1.4 | 10x2 | 15 x Ø cable | -25 °C a +75 °C | |
| 1.4 | 14x2 | 15 x Ø cable | -25 °C a +75 °C | |
| 1.4 | 19x2 | 15 x Ø cable | -25 °C a +75 °C | |
| 1.4 | 25x2 | 15 x Ø cable | -25 °C a +75 °C |
Reference: EA510HV (08. HP_EA510HV_e)
Description
Cables from 1 to 25 quads of 0.9 or 1.4 mm, polyethylene insulated. Quads are stranded in layers to form the core which is then protected by an anti inductive sheath with reduction factor 0,3.
They are used as control cables up to 90 kHz signals, especially in rail infrastructures, when protection is required against the induction of high voltage lines. For installation in ducts or directly buried in tunnels where protection against rodents and fire resistant characteristics are needed.
CPR Classification: B2ca, s1a, d1, a1. (Check availability)
